Instructions

Within the box you will find:

Now let us go through how to mount and position the MiTee Gear Phone Holder!

Step 1: Mount

The first thing to do is make sure your golf buggy handle is within 15mm and 35mm diameter
We now need to attach the mount to your buggy – we recommend a central location on your handle to have the best view of your phone while on the move
Now unscrew the mount all the way to allow you to attach it to you golf buggy
There are 3 levels in which the mount can be positioned to allow for secure attachment
Once you have found the right setting, re screw and make sure the ball joint is facing up towards the user’s face
Now this is attached, this never needs to come off!

Step 2: Phone Holder and Silicon Bands

Prior to attaching the phone holder to your mount, unscrew the back nut all the way to attach your silicon band
Make sure the silicon band is running vertically with the horizontal phone holder
Once the silicon band is in position, re screw the nut on the back of the phone holder (not completely as it needs to be loose to attach to the mount)

Step 3: Attaching Phone Holder to Mount

With the phone holder and mount all set, it is now time to attach the phone holder to the mount (ball and socket joint)
Make sure the nut on the back of the phone holder is unscrewed, but still just attached
Push the phone holder onto the mount until you hear it click (may need a bit of pressure to lock in)
Position the phone holder into your ideal location (spins 360 degrees) and then tighten the nut on the back. If you want to reposition later, loosen the nut, move the phone and re-tighten

Step 4: Attaching your phone

The clamp section of the phone holder is spring loaded. Position the middle of your phone in the clamp (may have to move up or down depending on button locations on specific phones)
The 4 corners of the silicon bands are then stretched over each corner of your phone to secure it

Now you are ready to hit the course! 😊